Advantages of lost foam casting manufacturing equipment

According to the analysis of market data over the years, lost foam casting process equipment has many advantages, but people who are in touch with this industry do not necessarily understand all of its advantages, so there will be certain restrictions when purchasing.

1. The specifications and shapes of castings are accurate, which can be reused and reduce costs.

2. The surface of the casting is smooth and the finish is high;

3. There is no sand core and no core-making process, which eliminates the unqualified products caused by core-making and core-setting.

4. The casting process is simple, and there is no need to close the box and take the mold, which greatly reduces the working time;

5. The dry sand molding used by zinc alloy die casting manufacturers does not use adhesives or water, which reduces the unqualified products caused by these.

6. The molding sand can be reused, so the molding sand preparation process and waste sand treatment process are cancelled; this greatly reduces the production time of the project,

7. The casting is smooth and delicate, which reduces the process of grinding the casting;

8. The burning riser can be set at a reasonable position according to one's own requirements and will not be affected by traditional factors.

9. Negative pressure pouring, the tissue density is more accurate;

10. Combined pouring, production line, improve productivity;

11. The production is highly automated, and different lost foam casting products can be produced online in one day.

12. The draft angle can be canceled during the production process;

13. The mold used can be reused up to 100,000 times, which reduces the maintenance time during the production process;

14. In the case of forging, the pollution is reduced, the working environment is improved, the work difficulty coefficient is reduced, and both male and female workers can work.

15. The work process is reduced, reducing the difficulty of tedious work for mechanical casting manufacturers;

16. The design is free, not limited by the traditional process, and can produce ideal castings according to the performance of the parts.