The Brief Introduction to 300MM 12Inch Cutter Suction Dredgers

The cutter suction dredger uses the rotating reamer to loosen the soil at the bottom of the river, mixes it with water to form mud, sucks it into the pump body through the mud suction pipe, and sends it to the mud discharge area through the mud discharge pipe. There are two steel columns at the stern of the dredger. When dredging, one of them is inserted into the river bottom as a positioning pile, and the dredger is pulled by the anchor cable. The positioning pile is used as the center to swing left and right for dredging. When moving forward, like walking on two legs, use another steel column to replace the pile alternately, and the reamer dredging process is fan-shaped. With its continuous completion, it is a dredger with high efficiency and low cost. It is suitable for the dredging of inland rivers and lakes and coastal ports with small wind waves and low flow velocity. It is more suitable for excavating sand, sandy loam, silt, and other soils. Using a toothed reamer can dig clay, but the work efficiency is low. Milestone Dredger Company successfully exported equipment to Nigeria, Kazakhstan, Chad, Indonesia, and other countries and regions. Customers particularly appreciate and praise the hydraulic cutter suction dredger for inland river dredging. Milestone Dredger Company is dedicated to providing the best dredging solutions on the market to our customers. A hydraulic dredger with a 300-mm (12-inch) cutter suction dredger uses centrifugal pumps with a rotating cutter head to loosen, lift, and transport dredged material. It is supported by spuds and anchor winches to ensure that the vessel remains securely anchored during dredging. The cutter ladder is brought down. The cutter head is moved sideways by pulling on the side wires, swinging around the main spud. The spud carriage propels the cutter suction dredger forward.